Cixi wang s Auto Parts Manufactory
5 1

No Resistor White High Performance Spark Plug L6T For NGK BM6A

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Quick Information

  • Brand Name: ANGELMAN
  • Place of Origin: China
  • Model Number : A7TC

Description

Product Specifications

ITEM:Spark Plug
Part No.:L6T

Specifacation:

Diameter 14*1.25mm
Reach 9.5mm
Hex 19mm
Resistor No
Electrode Gap 0.6mm
Center Electrode copper
Tip Configuration Single

Feature

1, Isostatic Pressing Ceramic,great mechanic and electric features.
2, Copper Core electrode and Nickel plated housing prevents oxidation and corrosion.
3,High dielectric strength
4,Improve anti-fouling,corrsion resistance
5, Corrugated ribs prevent flashover

APPLICATION


EQUIVALENT MODELS

Applicable Models
Generators
ECHO EG-1800
GEN-PRO GP-40 GP-40E GP-48 GP-48E
GRASS WAND 500A
KAWASAKI KG5000 (To 1983)
McCULLOCH Pro 2300E Pro 3500E Pro 600E Pro 800E RA330ES
MERC-O-TRONIC Lighting Alternator/Generator
NISSAN GX1000 :GX1600
O & R (Orline) All Models
POWERMATE PM1500 PM3000 PM800
REINER ERF2 ERF3
TANAKA QEG-250 :QEG-300
Brushcutter/Trimmer/Edger
Astron K12AD ST-16 Shingu SW16-DX TA-33 TF22-DVX TF22-DVXC
TG18-DVXC TG25-DX TG28-DXC
Chipper/Shredder/Mulcher
Asplundh JEX
Marine Outboard
Sears 3.5hp(59501 ,59900 ,6091 ,6094)
Motorcycle Moped/Scooter
Advanced Engine Products Chicken Power ,Pony Express
Bike Machine Bicycle Engs.
Globalman Bike Motor
Power Products Bike Machine
Safari Motorized Bike
TAS Bike Engine

 
SPARK PLUG OUTLINE ANALYSIS AFTER USE

Overheating
Insulator skirt side was”blach white”shaped electrode ablation prematurely. Because premature ignition timing,cooling system adverse; using a low-grade gasoline, mixture too lean; spark plug into the combustion chamber and spark plug heat value too low; spark plug installation torque is not enough, the outer seal leak worse.

Insulator breakage
End of the spark plug insulator skirt cracking or breakage.The use of low-grade gasoline or cause premature ignition timing.

Oil wet
Hulled face screwed around and luminal surface portion of the insulator and the electrode surface adhesion side skirts with black wet shiny oil.Mainly piston rings, cyclinder wear and tear to because improper carbutetor adjustment

 
Normal operation
End of the spark plug insulator skirt was brown, brown or light gray, electrode erosion is very small, indicating that the spark plugs and the engine is matched
 

Too much coke
Side electrode and insulator attached to a thick layer of yellow skirt powder, is due to the use of leaded fuel additives caused

 
Hot combustion
Melting electrode, the center electrode and the side electrode of the port portion into a molten state. Because premature ignition timing, cooling system adverse; using low-grade gasoline, mixture too lean; spark plug into the combustion chamber and spark plug heat value too low; spark plug installation torque is not enough, the outer seal leak worse

Toner Blackened
Screwed steel face and cavity surface portion of the insulator side skirts and black carbon electrode surface is covered by sediments, causing severe spark plug flameout. Mainly due to the mixture is too thick, clogged air filter, choke improper use; excessive oil consumption, ignition time lag; prolonged low speed and the use of high heat value of the spark plug.

Lead Contamination
Insulator skirt side white powder or yellow,brown, green, and black lead color. Since tetraethyl lead in gasoline at low engine load operation of the skirt adhered to the end surface of the insulator, when the engine speed, high speed, full load operation, the temperature increases further, the spark plug insulator formed on the surface of the conductive lead compound due to temperature increased with the increase, eventually leading to fire the spark plug.

 
Flashover
Porcelain surface axially obvious traces the arc burning sparkle. Is due to prolonged use spark plug electrode burning, the gap is too large, high-voltage insulator jacket poor performance, aging; porcelain high-voltage lines and the gap is too large.
 
 
 
 
 
 
 

Mounting torque is too small
Deformation of the outer washer inadequate leak, resulting in insufficient cooling spark plugs. Spark plug could easily lead to overheating and even pillow melting electrode, porcelain skirt burst.

Corona
On the insulator layer of yellow scale. 2 is due to air under high voltage to 30000 volts is ionized impurities in the air is formed on the insulator attached

 
External damage
Electrode and insulator skirt severely deformed damaged, is due to incorrect use spark plug model, and the impact caused by cylinder
 
 
 
 

PRODUCT IMAGE


Product Image

  • No Resistor White High Performance Spark Plug L6T For NGK BM6A image

Related products from premium suppliers on EC21

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To barel
Cixi wang s Auto Parts Manufactory
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Couplings
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.